AR-QS001-Standard Bridge Wire Electric Igniter
technical parameter
0.7±0.05Ω
-Safety Current: <=400mA (0.4A)
-Safety Test Current: 100mA(0.1A)
-Ignition Current:＞0.8A
-Firing Time: 50ms
-Pyrotechnic charge: 0.03-0.035g
-Diameter of matchhead: 3-4mm
Optoelectronic Signal Module
technical parameter
1.8±0.3Ω
-Fusing current (mA):400
-Safe non-ignition current: 5min/300mA
-Reliable ignition voltage:2.5v
Heat resistance:
-Heating to 280℃ without load for 300s
-Solder resistance: 280℃, 10 seconds for 3 cycles
-Bridge wire melting point: >3200℃
-Operating temperature: -40～120℃
High temperature resistance:
-No ignition at 480℃
-Retardant rating: UL94 V-0
AR-DH001-Ignition Resistor Electric Igniter (Large/Small Head)
technical parameter
1.0±0.1Ω
-Safety Current:500mA
-Safety Test Current: 200mA
-Ignition Current: >=0.8A
-Firing Time: 50ms
-Pyrotechnic charge: 0.02-0.03g
-Diameter of match head: 2-3mm
AR-TX001-Special Effects Electric Igniter
technical parameter
1.0±0.1Ω
-Safety Current: 400mA
-Safty Test Current:100mA
-Ignition Current: >0.8A
-Firing Time: 45ms
-Pyrotechnic charge: 0.03-0.035g
-Diameter of matchhead: 3-4mm
Discuss Your Requirements
Not sure which product or configuration fits your application?
Contact AURAN to discuss your application, electrical requirements, firing equipment, connection requirements, or product configuration.